NEW Color Sofirn C8F LED Powerful Flashligh Cree XPL 3500ml Lantern 21700 Rechargeable Super Bright Torch Green Brown | Лампы и

NEW Color Sofirn C8F LED Powerful Flashligh Cree XPL 3500ml Lantern 21700 Rechargeable Super Bright Torch Green Brown | Лампы и

The C8F is a versatile flashlight that uses three Cree XP-L LED beads and has a lifespan of approximately 50,000 hours. The main body of the flashlight is made of aerospace grade 6061 aluminum alloy, manufactured by CNC. After hard anodizing, it can obtain a solid body, impact-resistant geometry and better heat exchange. With reverse polarity protection to prevent incorrect battery installation.

Specification:

Lamp bead:3*Cree XP-L
Working Voltage: 2.8V-4.2V
Battery Options: 1*18650/1*21700
【Suggest 21700 battery】
Dimension: 149mm (length)*44.6mm (head diameter)
Weight: about 200 gram (without battery)
Toughened mineral glass lens with AR coating.
Waterproof level:IPX8
【submersion up to a maximum depth of 1.5 m underwater for up to 30 minute】
Advanced Temperature Regulation (ATR) technology: ATR will adjust the brightness level automatically when the driver temperature reaches 50C (122F) to prevent overheating.

Power Indicator:

The LED indicator on side switch blinks in green for 5 seconds when turns on.
LED indicator is Steady Green if the voltage is between 3.4 volt to 4.2 volt.
LED indicator is flashing Red if the voltage is between 3 volt to 3.4 volt.
LED indicator is rapid flashing Red if the voltage is between 2.8 volt to 3 volt.
The flashlight turns off automatically if the voltage is lower than 2.8 volt. Please insert new battery.

Operation Instruction:

The tactical tail switch controls power ON/ Off.
The side switch controls other flashlight functions as follows:

Group 1/ Group 2/ Group 3:
Short click the side switch to cycle through modes:
Eco-Low-Mid-High-Eco-Low-etc.
Press the side switch for 0.5 seconds to enter Standby (main led is off).
4 Four fast clicks convert from one group to the other, 2 blinks confirm the change.

Group 4: Ramping
Press and hold side switch to ramp up or down. Ramping changes direction when press button again within 1.5 seconds, same direction when ramping again after 1.5 seconds. The light blinks when it reaches Moonlight or Turbo. When the light is on, click to Standby.

No matter in which group:
Hold and press the side switch for 1 second to enter Moonlight from Standby, one click returns to Standby.
Double clicks to activate Turbo mode from On / Standby, one click returns to the last brightness used or Standby.
Triple clicks to activate Strobe mode from On / Standby, one click returns to the last brightness used or Standby.
Memory Function: The last brightness used can be memorized when convert from Group to Group. When it goes back to the group, it starts from the remembered brightness level.

OFF
Press and hold the side switch for 0.5 seconds to enter Standby (except in Ramping Mode).
Click the tail switch to Cut Off. Please click both tail switch and the side switch to turn on if the light was in Standby last time.

Selections:

without battery:
1*flashlight,
1*lanyard,
1*user manual
2*replace orings

with battery kit:
1*flashlight
1*lanyard
1*21700 battery
1*USB charger
1*user manual
2*replace orings