SR501 SR505 SR602 AM312 Adjust IR Pyroelectric Infrared Mini PIR Switch Module Motion Sensor Detector for arduino | Обустройство дома

SR501 SR505 SR602 AM312 Adjust IR Pyroelectric Infrared Mini PIR Switch Module Motion Sensor Detector for arduino | Обустройство дома

SR501:

Condition:100% brand new with good quality Product Type: HC--SR501 Body Sensor Module Operating voltage range: DC 4.5-20V Quiescent Current: <50uA Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger) Delay time: 5-18S(adjustable) the range is (0.xx second to tens of second) Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds Board Dimensions: 32mm*24mm Angle Sensor: <100 ° cone angle Lens size Sensor Diameter:23mm(Default) Applications: *Security Products *the human body sensors toys *the human body sensor lighting industrial automation and control, etc Use: It can automatically and quickly open various types of incandescent, fluorescent lamps, buzzer, automatic doors, electric fans,automatic washing machine and dryer Machines and other devices,is a hightech products. Especially suitable for enterprises, hotels, shopping malls, warehouses and family aisles, corridors and other sensitive Sense of region, or for the security zone automatic lighting, lighting and alarm systems.

SR505：

Sensor performance and features: ■Automatic induction: When a person enters its sensing range, it outputs a high level. When the person leaves the sensing range, it automatically delays the high level and outputs a low level. ■ Internal digital signal processing, anti-interference enhancement ■ High sensitivity and high reliability, can be widely used in automatic sensing circuit technical parameters ■ Repeatable trigger mode: After the high level of the sense output, during the delay time period, if the human body is active in its sensing range, its output will remain high until the person leaves, and the delay will be high. It becomes low level (the sensing module automatically delays a delay period after each activity of the human body is detected, and the time of the last activity is the starting point of the delay time). ■ Micro power consumption,: Quiescent current <50 microamps, especially suitable for dry battery powered automatic control products. ■ Output high level signal: It can be easily connected with various circuits. ■Anti-interference enhancement, internal use of digital signal processing, direct high and low level output Specification: 1.Product Name: Human body sensing module 2.Working voltage: DC4.5V-20V. 3.Static current: ≤60uA 4.Sensitivity (SENS): Not adjustable 5.Light control (DARK TIME): 2 seconds, not adjustable 6.DELAY TIME: 8S+-30% (can be customized within a few tenths of a second - timely minutes) 7.Induction distance: Within 3m 8.Trigger time: Repeatable 9.Input mode: 3.3V high and low output 10.Sensing range: angle ≤100 degrees cone angle, distance ≤4m 11.Working temperature: -20 ° C ~ + 80 ° C 12.PCB outline size: 23mm/0.39’’x 10mm/0.31’’

SR602:

High sensitivity, compact size, lens installed, pin header is soldered, available power supply, no need for debugging The output high-level time is adjustable from 2.5 seconds to 1 hour, and the output time set at the factory is 2.5 seconds. The blocking time is not adjustable. After the photosensitive element is installed, it does not work during the day but works at night, if it doesn't contain photosensitive components, it will work all day (the default is that no photosensitive components are installed) It can be used for human body induction lamps, alarms, security, access control on-demand camera, agricultural and forestry mining automatic equipment. Used for human body induction lamps, alarms, security, agriculture and forestry mining automatic equipment, etc. Working parameters: Pyroelectric human body infrared sensor module, model: SR-602 Sensing distance: up to 5 meters; recommended 0-3.5M. Output: high level, H=3.3V, L=0V Power supply DC: 3.3V-15V Quiescent current: 20uA Applications: Used for human body induction lamps, alarms, security, agriculture and forestry mining automatic equipment, etc. Used for access control on-demand camera, agricultural and forestry mining automatic equipment. Feature: High sensitivity, fast response, small static power consumption, small size, easy to install, and is installed. The lens, the pin header has been soldered, and the power supply is provided without debugging. Can be used for body sensor lights, alarms, security, Access control on-demand imaging, automatic equipment for agriculture, forestry and mining. Output:Switching Transducer;Theory:Optical Sensor;Usage:Position Sensor;Sensitivity:Adjustable Specification: Model Number:SR602; Type:Vacuum Sensor; SIZE:15mmx15mmx20mm; Sensing distance:3M-5M; Delay:Adjustable Key points: 1. The high level time of the output of this product is adjustable, 2.5 seconds to 1 hour, the output time set at the factory. It is 2.5 seconds, and you can change one chip resistor if you need to change it.Read the resistance value corresponding to the typical delay time.Please refer to the relevant form above. 2. Blocking time, 2 seconds, not adjustable. 3. The factory is defined as repeatable trigger and cannot be changed. 4. The supply voltage of this module is 3.3V to 15V, and the limit voltage is 2.8V to 18V. 5. Module output timing is: output high level for 2 seconds after power-on, then go low, enter standbystatus. If the delay time is changed, the time when the module outputs a high level after power-on will increase accordingly, which can be understood as The startup time after entering the normal working state after the electric power will increase. 6. After installing the photosensitive element, it does not work during the day, work at night, does not contain photosensitive components, and works all day ( There are no photodiodes on the module,please purchase separately if needed. Recommended: ordinary F3 photodiode ) It is considered that there is no photosensitive element installed. 7. This module is very sensitive, pay attention to the installation position, try to avoid the heat source radiation source (air outlet / direct sunlight) 8. The sensitivity of this module is adjustable, and you need to change a chip resistor grid. 9. When soldering with 220V ordinary soldering iron, it is necessary to unplug the power supply before welding. It is recommended to use 24V low voltage soldering iron.

AM312:

M312 Human Sensing Module: Based on passive body infrared technology digital intelligent automatic control products, high sensitivity, reliability, widely used in various types of automatic induction electrical equipment. Low power consumption, small size, easy to install.(5 PACK can search ASIN B07NPKMH58) Internal use of digital signal processing, pit interference strong. Repeatable trigger mode: that is, after the induction output is high, in the delay period, if the body in its induction range of activities, the output will remain high until the delay after the person to become Low level. (Ie, the sensing module automatically detects a delay period after each activity of the human body, and takes the last active time as the starting point for the delay time). Working voltage: DC 2.7-12V;Static power consumption: <0.1mA;Sensing range: ≤100 degree cone angle, 3-5 m; (required depending on the lens) Working temperature: -20 to 60 ℃ Specification: Working voltage: DC 2.7-12V; Static power consumption: <0.1mA; Delay time: 2 seconds; The blocking time: 2 seconds; Trigger: can be repeated; Sensing range: ≤100 degree cone angle, 3-5 m; (required depending on the lens) Working temperature: -20 to 60 ℃ PCB szie: 10mm x 8mm Total size: Approx. 12mm x 25 mm Module Lens: Small lens