DOERSUPP Brushless High-pressure Airless Spray Gun Spraying Machine Professional Wall Painting DIY Power Tools | Инструменты

DOERSUPP Brushless High-pressure Airless Spray Gun Spraying Machine Professional Wall Painting DIY Power Tools | Инструменты

Q&A （Question & Answer）

Q1:Which type of paint can be added？

A1:-Non-particle-free and fluid household ordinary paints and liquid paints can be used;
-Paints and coatings that can be diluted, or those containing solvents, two-components, dispersions, and latex;

-Do not use other paints for spraying without permission.

Q2:Which situation can be used？

A2:-Suitable for all spraying operations in the workshop and on the construction site，feed for all spraying operations with a small dispersion range with a spray gun or an airless drum with internal.
For example: doors, door frames, railings, furniture, wood cladding, fences, steel parts, indoor ceilings, walls, etc.

Q3:How to clean the machine after use？

A3:Cleaning method after will be shown at the bottom of ITEM DESCRIPTION

Specification:
- Plug Standard: EU Plug (220V), US Plug (110V)
- The nozzle diameter: 0.15mm~0.2mm
- Power: 1500W
- The best spray distance: 35-50cm
- Maximum flow: 1.8-3L/Min
- Pressure Resistance Of High Pressure Pipe:25Mpa
- High pressure hose length:10M
- Maximum Pressure: 20Mpa
- Using Pressure:15Mpa
- Standby Pressure:20Mpa
- Package size: Approx. 40x45x45cm/ 15.75x17.72x17.72"

Notice:
- Please ensure that the plug specifications of the power supply to avoid explosion caused by unsuitable voltage.
-Diluting agent is a combination of various organic compounds, including benzene, toluene, butyl ester, formaldehyde and other substances. It is a kind of liquid that dilutes the paint, this is very volatile, do not use it in a confined space.
- Coatings, paints, adhesives, emulsioni paint, rust-proof paint or others without large particles that can be used. And particles can not be used.

Features:
● Advantage: Flow Regulation, High Pressure, Spraying Uniformity, Fast Disassembly, With Pressure Gage
● Well-equipped: Included spray gun, filter, lubricating oil, 10m high-pressure tube, 50cm extension bar, material sucking tube, pressure gage
● Simple operation, easy to carry, Low noise
● Excellent surface quality: One-time film forming, smooth spraying and uniform coating, no brush marks and particles
● High penetrability, increase the mechanical bite force with wall body, better solve the coating of bubbles, cracks and other issues
● Coating rebound small, greatly improve the working conditions, more conducive to the health of construction personnel
● Widely Used: Steel surface structure, Epoxy flooring, Oil paint construction, Tile industry water, Home decoration construction, Construction business, Paint spraying construction of ship, Spray construction of silicon mud algae, Die oil spray

Package Included:
1x Wall Paint Sprayer Kit
1x English Manual

Operation Method:
1. Put the feed pipe and the return pipe into the liquid (paint) at the same time
2. Turn on the power switch
3. Turn the pressure adjustment knob to the maximum (the factory setting is the maximum by default, if you can't turn it, you can use a wrench or hexagonal screwdriver to assist in the screwing)
4. Open the return valve (in a vertical state), wait for water to leak out of the return pipe; close the return valve (in a horizontal state)
5. At this time, the machine is under pressure, and the spray gun is in the atomized state by pressing the nozzle tip to the front. The pressure valve can be adjusted according to the spraying condition
6. When spraying is finished, open the return valve, pick up the feed pipe and return pipe, and when there is no liquid flowing out of the return pipe, turn off the power(If the liquid is a viscous liquid, it is recommended to let the machine draw clean water to clean the pipe and then repeat the above steps to turn off the machine to prevent the pipe from being blocked when it is used again)

Cleaning method after use (off state)
-Clean equipment is the best guarantee for troublefree operation of the equipment. Clean the equipment after spraying. Under any

circumstances, do not allow the remaining paint to dry out and harden in the equipment

-The cleaning agent used (solvents with a flash point higher than 21°C can be used) must be suitable for the paint used.
-Cleaning process:
1.Take out the suction tube from the paint;
2.Close the pressure reducing valve to the "spray" position;
3.Turn on the system switch;
4.Pull the trigger of the spray gun to discharge the remaining material in the spray gun from the suction tube, high pressure tube

and spray gun into the open container;
5.Dip the suction tube with the return tube into a container with a suitable cleaning agent;
6.Turn the pressure adjusting knob counterclockwise to the lowest pressure position;
7.Open the pressure reducing valve to the PRIMeE position;
8.Put the appropriate detergent pump into the system and continue for a few minutes;
9.Close the pressure reducing valve to the spray position;
10.Pull the trigger of the spray gun;
11.Pump the remaining detergent into the open container until the system is emptied;
12.Turn off the system switch.