Kindly note:

Different Area use different ink cartridge model although printer model is same!

Please check your original ink cartridge model number before place order.

Our ink cartridges are Remanufactured.

If the ink cartridge used in your printer is H122(or 122xl) ink cartridge, our  ink cartridge will be compatible with your printer. 

Package Including:

• 1Pcs 122 122XL Black ink cartridge 
• 1Pcs 122 122XL Tri-Color ink cartridge 
•  

Products Information 

1. Color : Tri-Color and Black

2. Capacity : black 25ml ,Color 21ml 

3.Cartridge Type: Re-manufactured  Ink Cartridge 

4.Cartridge Model : For H122 122XL

5.Shelf life : 24months 

6.Suitable printer model :

 for  Deskjet 1000 1050 2000 2050 1510 2050s 3050 3000 3050A 3052A  

Customer Frequently asked questions

Question 1

The printer is showing "Low ink level"/ "Empty" /“Red X” / "!"(yellow Exclamation mark), what to do?

It's Normal condition  for all re-manufactured ink cartridges that show such information. When you see such information, please Ignore it and Click "OK" or "Close" to continue to print.

For some printer, you can also Press and Hold on the STOP / RESET BUTTON (red inverted triangle button) for 5-10 seconds, the message window will disappear.

If this method can not solve the problem, try chip cleaning as shown in Question 2

Question 2   Printer showing "failure / damaged / error / problem...", what to do? 
 

Step 1: Remove the ink cartridge and re-install. If issue still exist, go ahead the setp 2.

Step 2: Turn off the printer, unplug the printer, remove the ink cartridge, wait for a while,

then re-install the ink cartridge and restart the printer.If issue still exist, go ahead the setp 3.

Step 3: Chip cleaning (contact points cleaning)

Clean the ink cartridge chip with eraser, then re-install, see if it will work.(Picture 1)

Clean the ink cartridge chip with an alcohol cotton swab, after 1 minutes, then re-install, see if it will work.(Picture 2 .Picture 3)

Notice :

If all the methods above can not solve your problem, thanks contact us for solution

Question 3.Flashing yellow light, what to do?

Turn off the printer, unplug the printer, wait for a while, and then re-start the printer.

If the flashing disappear, press "OK", then you can print normally.

 If still flashing, Press and Hold on the STOP / RESET BUTTON (red inverted triangle button) for at least 5 seconds, then release. Repeat 2-3 times until the falshing disappear. Then wait 10-15 seconds, It will be fine.

 If your printer hasn't "stop/reset button", you can try to ignore the flashing and press "OK" to continue to print, see if it will work.

If this method can not solve the problem, try chip cleaning as shown in Question 2