IR Security isolated 1-10V LED Dimmer | Освещение

IR Security isolated 1-10V LED Dimmer | Освещение

Please contact seller before you place order.

ETH–8008U+ : if your LED lamps with 0/1-10V dimming driver inside (led driver has a 0/1-10V dimming signal input), then you can choose the ETH–8008U+. Such as MeanWell LPF, ELN, HLG, LCM series, MOSO 1-10V series, LIFUD 1-10V series.

ETH – 8008U+ is security isolation type 1-10V dimmer, the maximum load power is 800W, the load current is 5A and 10A, within the scope of the power and the current, maximum support parallel connection 20PCS 0/1-10V led driver together, ETH-8008U+ support infrared remote control function.

The ETH-8008U+ has two kind of connection mode:

1). LED 1-10V driver AC input connect to mainly electricity grid, cross dimmer. this kind of connection mode is dimmer don't pick up the load, without considering load power and load current, only need to consider of the dimming current does not exceed 300mA, then can maximum parallel connect 20PCS adjustable led power driver. But this kind of connection mode, if use in 1-10V adjustable driver or not standard signal 0-10V adjustable driver, then will cannot switch off the light, need to add a extra switch in front of the dimmer to shut off.

2). Another is led driver AC input by dimmers power supply, this kind of connection mode, need to consider of the load power and load current, dimmers maximum load of 800W, current maximum 5A, new model will upgrades to 10A.
 

1. General information 
ETH-8008U+ is a security isolated 0/1-10V intelligent dimmer for LED lighting brightness adjusting, and with manually knob adjusting and IR wireless remote adjusting optional. It suitable to control the LED dimming driver and electronic rectifier which based on 0/1-10V dimming signal, to adjust the brightness of the LED lamp or fluorescent lamp, etc. It has grey scale level 256, with scheduled shut down (1-4 hours), brightness hot key and fixed gray output functions.

2. Specifications
1)   Max load power:          800W
2)   Supply voltage:           AC90-240V  50/60Hz 
3)   Output:                         1 channel
4)   Circuit design with security isolated, for protect load be safety.                             

5)   Switch Max current:   5A  ( will upgrade to 10A next production)
6)   Dimming current:      < 300mA       
7)   Adjust the voltage and current: 10%-90%
8)   Dimming range:        0-100%, no frequency glisten
9)   Control mode:           Manually and IR remote
10)  Dimming voltage:    1-10V
11)  Scheduled shut down: 1-4 hours 
12)  Remote distance:   10M
13)   Compatible above 90% led driver which based on standard 0/1-10V dimming signal

3. Installation and use instructions
1) The input voltage of this controller should to be AC90 -240V.
2) Never connect two wires directly in case of short circuit.
3) Knob operation: Rotary knob clockwise to increase brightness, knob counterclockwise rotation will 
decrease the brightness.
4) Remote control operation: First use, please take out the lucid spacer which under remote down 
side, the remote control facing the infrared receiver, ensure that there are no obstructions between 
remote controller and receiver, when dimmer receives an effective signal from the infrared remote 

control, the light on the upside flickers.  Long press “+” and “-“ can be fast dimming

Notice:
Please touch the motherboard while dimmer is connecting to AC power, and setup must according technical guide

How do I choose LED dimmer?

1. ETH - 800: if your light source working voltage is DC12 – 24V, then you can choose ETH-800. It mainly use for low voltage DC12 -24v input led strip, MR16 spotlight. The maximum power output: DC12V<96W, DC24V<192W, the effective power is 80%.

Wiring is as follows: AC220V - > AC power supply(AC220V input and DC24V output) - > dimmer - > led lamps(DC12V – 24V input)
 

2. ETH - 8006: Suitable for high voltage AC input, based on triac type led driver or trailing edge phase dimming driver. maximum power 300W, effective power output 200W;  while AC110V input its effective power is 120W.

Connection drawing: AC90-240V - > ETH-8006 dimmer - > triac type led driver or trailing edge phase dimming driver - >LED light source.

The ETH - 8006 is constant current and adjustable voltage;

It’s with trailing edge phase dimming technical, PWM modulation, no twinkling while dimming, quality is better than triac dimmer.

Triac type dimmer is outdated technology on dimming filed, with frequency twinkling and high power dissipation.

3. ETH–8008U+ : if your LED lamps with 0/1-10V dimming driver inside (led driver has a 0/1-10V dimming signal input), then you can choose the ETH–8008U+. Such as MeanWell LPF, ELN, HLG, LCM series, MOSO 1-10V series, LIFUD 1-10V series.

ETH – 8008U+ is security isolation type 1-10V dimmer, the maximum load power is 800W, the load current is 5A and 10A, within the scope of the power and the current, maximum support parallel connection 20PCS 0/1-10V led driver together, ETH-8008U+ support infrared remote control function.

The ETH-8008U+ has two kind of connection mode:

1). LED 1-10V driver AC input connect to mainly electricity grid, cross dimmer. this kind of connection mode is dimmer don't pick up the load, without considering load power and load current, only need to consider of the dimming current does not exceed 300mA, then can maximum parallel connect 20PCS adjustable led power driver. But this kind of connection mode, if use in 1-10V adjustable driver or not standard signal 0-10V adjustable driver, then will cannot switch off the light, need to add a extra switch in front of the dimmer to shut off.

2). Another is led driver AC input by dimmers power supply, this kind of connection mode, need to consider of the load power and load current, dimmers maximum load of 800W, current maximum 5A, new model will upgrades to 10A.
 

4. ETH-9000: this model is RF wireless remote control, high voltage AC + PWM function dimmers.

It can suitable for triac led driver, also can match with PWM dimming led driver and 1-10V led driver. Match with triac led driver then effective power is 200W; Match 0/1-10V PWM dimming driver can be parallel connecting 20pcs together. The RF wireless remote control distance is 30 meters(under the condition of no interference)

As below is list of shipping cycle time for your reference,if you not receive goods within default time, please contact with us.