2014 New Pro 3000 RPM Electric Nail Art Drill Manicure Set File Improved Overheat + Vibration US/EU Plug 10 | Красота и здоровье

2014 New Pro 3000 RPM Electric Nail Art Drill Manicure Set File Improved Overheat + Vibration US/EU Plug 10 | Красота и здоровье

Pro Electric Nail Art Drill File Improved Overheat + Vibration Manicure Set asdsad Features:

• 100% Brand New

• Weight:1640g

• Rotation Up to 30,000 RPM

• Easy to use dialing speed control

• Forward and reverse operation switch

• Improved Version : Quiet and smooth - very low vibration version for comfort grip

• Improved hand piece cable ending design so that the cable will not loose out easily

• Improved hand piece holding area to prevent overheating during a long period of usage.

• Optional Foot pedal for easy operation and comfort

• Use for both pedicure and manicure

• The nail file can be used for natural as well as artificial nails

• For professional studio use or home use

• Voltage: 110V~120V,US Plug; 220-240V,EU Plug (Please Leave a Note If You Like the US Plug)

  If you use in 110V~120V countries like e.g. U.S. / Canada/ etc, Please choose 110V~120V(US Plug) standard for you

  If you use in 220V~240V countries like e.g. United Kingdom / Australia / All European Countries / etc, Please choose 220V~240V(EU Plug) standard for you

Operation Detail:

• Plug in the electric cord of the transformer to the main electric outlet

• Turn on the on/off switch on the transformer. (machine should be at the lowest speed when turning on)

• Select the desired speed by turning the variable speed control knob on the transformer

• The black switch in front of the transformer, next to the speed control selection knob is for forward and reverse rotation direction

• To use the foot pedal control, connect the end of the cord from the foot pedal to the out put hole at the front of the transformer and press down on the foot pedal

• To secure the bits: push in the desired bit firmly into the hole at the rotating head of the hand piece until the second lock click. (please note the bit has to pass through)

• To remove the bits: turn off the machine and gently pull the bit out.

Safety rules:

• Always unplug the tool when you change accessory or collets

• Do not engage the shaft lock button while the tool is running

• Do not use near or place in water. if motor falls into water, unplug immediately. do not reach into water

• Do not touch the bit after use. The bit is too hot to be touched by bare hands

• Keep dust out of eyes and lungs by using protective eyewear or a dust mask

• Always unplug it after use

• When the machine is not in use, all tool must be stored in a dry location abd keep out of reach of children.

• 1 x Electric Nail Drill Machine : Main control + Handpiece

• 1 x Table Stand for handpiece

• 1 x Foot Pedal Power Control

• 30 x Electric Nail File Drill Bits (With 3/32" (2.35mm) shank size)

• 6 x Optional Bits / Filing Heads (includes 1pc of emery rod with 4 sanding bands)

• 50 pieces of Sanding Bands with degree 80"

• 50 pieces of Sanding Bands with degree 100"

• 50 pieces of Sanding Bands with degree 120"