M.NT68676 Плата драйвера контроллера LCD/LED для LP156WH2(TL)(AA) CLAA156WA11A (HDMI+VGA+DVI+Audio) 1366*768 вкл.

M.NT68676 Плата драйвера контроллера LCD/LED для LP156WH2(TL)(AA) CLAA156WA11A (HDMI+VGA+DVI+Audio) 1366*768 вкл.

Brand Namelaez evawModel NumbernoDisplay Size7~10 InchScreen TypeEletromagneticCompatible BrandUniversalProduct TypePanel LCD ComboMeasurement unitset/setsEach pack1Resolution1366*768Signal InterfaceLVDSInput PortsHDMI DVI VGA AUDIOCompatible Models 1LP156WH4(TL)(A1)/(TL)(N1)Compatible Models 2LP156WH2(TL)(A1) N156B6-L0BCompatible Models 3LP156WH2-TLQB LTN156AT05Country/Region of ManufactureCHINA3 294,60 ₽3 294,60 ₽Add to CartBuy now3 294,60 ₽loader

Description

This is a great set of easy-reassembling LCD controller kit which is used to turn a unused LCD panel into a desktop/PC 
monitor. It will be a surprise that your unused LCD will be of good use, and no longer be a waste.  Or it is a very interesting 
things to make a monitor successfully by yourself.  It supports most of the LCD panel from 12.1" to 55" with a LVDS 
interface and a resolution than 2048x1152, plug & play kit, need soldering is not needed.

Description:

 M.NT68676.2A is a monitor control board, which supports LED/LCD panels with resolution up to 2048X1152.

 M.NT68676.2A can synchronize with computer automatically. Synchronization requires the synchronous signal which 

 horizontal and vertical sync are separated.

 M.NT68676.2A supports dynamic contrast control, headphone input and digital volume control simultaneously. 

M.NT68676.2A is with interface show in below:

 Board Size:5.47in(L)*2.28in(W)*0.67in(H)

 DOWNLOAD the specification of controller board

Buyer Tips:

 Please make sure the vertical and horizontal driver inside your LCD still works,this board can not fix it if it doesn't work.

 * Please order directly if your LCD model number is same as our title, or please DO leave us a message with your LCD 
    model and version when you are ordering.

   Q: How to find my LCD model number and version number?

   A: Normally the label on LCD backside includes information such as LCD model and  version number.

 * Please prepare VGA cable/DVI cable/HDMI cable and power adapter for the controller board you bought.
    They aren't included in the kit.

 * This board requires DC 12V 3.3A input power for LCD size under 17inch, and DC12V 4A for LCD between 17 to 22 inch.  
    The LCD cannot be lit up if the power current is not applied as stated. 

Please pay attention to the working supply for controller board as the following:

The supply as left picture showed can work but the right one doesn't!!

 * To protect this board from damage, high quality power adapter is recommend, you can buy from our store as well with 
    clicking below links:
    12VDC 3.3A power adapter: Click here

     12VDC 4.0A power adapter: Click here

Install Tips:

 * Keep the backside away from metal subjects when the power is applied, or it may cause short-cut or damage of main IC.

 * Since the driver and voltage varies from different LCDs, please do not any change jumpers on the board, or use the kit for 
    other LCD with different model number , otherwise you may damaged your LCD.  Please consult us if you have any other 
    question or want to use the kit for other LCD panel.

 * link the key button board, (starts from left side, and leave some pins on the right blank)

 * Connect LVDS with the LCD connector and control board (connect the marked LVDS area with 1st pin), and then insert 
   the VGA or HDMI or DVI input  signal(Default VGA input, please use the key buttons to switch for HDMI / DVI input) .

 *Apply with DC 12V power

 *Complete connecting kit.

 Here is the assembled LCD set:

 Now enjoy the success of DIY monitor, our professional engineer will always be happy to support you 
 if there is any question, thank you! 

 You can also view our video guide on youtube, thank you!

  The link of introduce : //youtu.be/s9xpn80muEk

 Note:

 Please leave a message of your LCD model and version when you make the payment ,thanks ! 

Package Including:

  1x LCD/LED Controller Board(M.NT68676 2.A)

  1x Keypad with Cable

  1x LVDS Cable

DEMO:(TFT LCD display screen is not included in this package.)

We accept payment via Escrow, you can pay with your credit card or debit card through Escrow.

Combined Shipment
For multi-item orders, please DO NOT submit payment until you have won all items you wish to combine.

Handling & Shipping Time
Handling Time: 1 business days
Shipping Time: 11-30 Business days

We stand behind all of our products with a 30-day, money-back guarantee.

• If you receive an item which is not in the condition as described, we will promptly provide you an refund or replacement
• If your item doesn't fit or you don't want it, you can return it for a refund (less shipping).
• For return shipment please contact us through eBay with supplying us the item number and reason for return (Return 
  acceptable up to 15days after you receive the item
• Refund will be issued within 1-2 business days upon the receipt of returned item
  
  Please contact us (eBay Messaging preferred) and allow us to make it right if you have any question with your order. 
  We will respond to all inquiries by the close of the next business day. Complete details of our return policy are included 
  on each product detail page.

Our customer service reps respond to inquiries via the eBay messaging system daily on business days.
Our working hours are(Monday - Fri-day):

CN: 9 AM - 6 PM       RU: 4 AM - 1 PM
AU: 11 AM - 8 PM      UK: 1 AM - 10 AM

DE: 2 AM - 11 AM      US: 8 PM - 5 AM ET