1000W solar grid tie inverter 10.5-28V DC to 110V or 220V AC micro Inverter pure sine wave CE | Обустройство дома

1000W solar grid tie inverter 10.5-28V DC to 110V or 220V AC micro Inverter pure sine wave CE | Обустройство дома

PV Inverter,On Grid Inverter,Grid Connect Inverter,Solar Inverter,Micro Inverter,MPPT,Pure Sine Wave Output,Power Automatically Locked

GTI Series Micro Inverter

Output Power:300W,500W,800W,1000W;For Home Station,Low Cost,Easy Intallation,For Monocrystalline Silicon & Polycrystalline Silicon

Product Description

GTI Series Can effectively prevent rainwater on the surface erosion, Built-in high-performance Maximum Power Point Tracking(MPPT)Function,Better able to track changes in the solar luminosity and control different output power, Effectively capture and collect sunlight. AC electric power transmission using the reverse transmission technology, Is one of our patented technology, The inverter output power can provide load priority use, Extra electricity to the grid, Efficient use of the inverter to the power emitted, Electricity transmission rate of up to 99%. 

Product Features

Intelligent MPPT & Weak Light Tracking Algorithm

Met The Grid Products Certification Standard

System Block Diagram & Application

Easy Installation & Multiple Stacking

In order to achieve higher power, we can use this inverter in stack. For example: 4 pcs of 300W grid tie inverter used in stack can achieve 1200W. And the stacking number is unlimited.

Single-Phase & Three-Phase Electrical Schematics

Single-Phase

Three-Phase

• Please install the inverters according to the user manual and connnet the groud safety.
• Forbid openning the shell with non-professional person ,only qualified maintenance person can repair the product .
• The inverter should be installed in the low humidity and well ventilated place,and remove the flammable things surrounding the inverter for avoiding overheating .
• Avoid children play when the inverter is working.
• Ensure the DC input and AC output when connect with PV.
• The Vmp and Voc of PV should be fuit for the prodcut for get output max.
• All inverter must secure connection ground wire.

1. The transition from a centralized to a distributed inverter optimizes energy collection.
2. The converter module integrated into the solar panels can reduce installation costs.
3. Soft switch technology to replace hard-switching technology can improve efficiency and reduce heat dissipation.
4. From cottage industry to mass production, standardized design (hardware and software) to improve reliability and reduce costs.
5. Using a special capacitor (due to the high failure rate). Design requires a higher voltage to reduce the current, we use a special electrolytic capacitors.
6. The converter can be connected to the grid to eliminate the need for many battery applications. The high price of batteries, require maintenance, life expectancy is shorter.
7. Work required micro-inverter power increasingly smaller (only a few hundred watts), which can reduce the internal temperature and improve reliability.
8. Micro-inverter solar inverter system needs to deal with a lot of a particular power level, in order to increase production, thereby reducing costs.