[Taiwan] rubber tire Acer shoes special DA-300M fast plastic densitometer hydrometer | Инструменты

[Taiwan] rubber tire Acer shoes special DA-300M fast plastic densitometer hydrometer | Инструменты

Precision ceramic porosity and volume density measuring instrumentDE-120M/DA-300M/DA-600M

.High precision, excellent performance, density and accuracy of 1/10000

To meet the measurement of porous material, it is more suitable for small product density detection

Suitable for: precision ceramic industry, powder metallurgy, coal and rock, new materials research laboratory

Basis:C20 ASTM,C134,C373,C329,GB/T3810,1966,2413,2834,5165,23561,ISO 2737,ISO 2738... Such standard.

Methods: using the Archimedes principle, according to the product characteristics and selection criteria, solid type usage, boiling saturation method, impregnation method, vacuum saturation saturation method, surface wax covering and surface coverage of vaseline.

• DE-120MThe porosity and bulk density can be measured quickly.0.01%, bulk density0.0001g/cm³Measuring fast, professional, precise and convenient! Very suitable for weight, weight of shaped refractory,Piezoelectric ceramic, powder metallurgy product... And other aspects of the detection.

• Apparent porosity measurement theory:Is used to measure the porosity with the external. This can determine the permeability of ceramics and other products, that is, the ease of gas or fluid through.

• Total porosity measurement theory:There is a good correlation between the total porosity and the products, including the outer and the closed porosity. As required to minimize the number of fine ceramics. Because the pores of the material influence the strength of fine ceramics is huge; the main factors for the pores leading to stress concentration; the size of the pores; shape and quantity will reduce the ceramic strength; surface defects; internal defects.

• Density:In a certain case, the porosity of the size determines the density of the high and low, as well as theAn important basis for densification of sintered bodies,Depending on the porosity and total porosity is the open pore volume, open closed cell volume and total volume ratio, the relevant standards are to oArchimedes principle buoyancy method to measure the volume, soUsually the ceramic product is the density of the body,Apparent density, apparent porosity, total porosity, water absorption rateFor its main measurement standards.

• Detailed technical parameters:

• Model: DE-120M DA-300M DA-600M
• Density analysis:0.0001 g/cm3 0.001 g/cm3 0.001 g/cm3
• Maximum weighing:120g 300g 600g
• Minimum weight:0.001g 0.005g 0.005g
• Measurement range:0.0001 - 99.9999g/cm3 0.001 - 99.999g/cm3 0.001 - 99.999g/cm3
• Porosity: 0.01% 0.1% 0.1%
• DE-120M/DA-300M/DA-600MMeasurable item:
• Measurement of porosity, total porosity and closed porosity
• Measuring the volume density, apparent density, total volume, pore volume, obturator volume
• Water absorption measurement
• True density measurement of powder
• Apparent density and bulk density of powder
• Determination of the density of other non absorbent solids

• mainCharacteristic
• Flip FreeCover free operation mode,Operation is more simple, more rapid, more in line with the new materials laboratory work specifications
• fastDirect readingPorosity, total porosity, closed porosity,densityVolume and oil volume
• DE-120Mten thousandOne partdensityAccuracy, precisionmorehigh
• Full automatic zero tracking,Buzzer alarm, overload alarm function
• Use of water as the medium, but also the use of other liquid media
• With the actual water temperature setting, measuring the density of the medium setting, water treatment medium density settings
• The setting function of the upper and lower limits of the air buoyancy compensation setting and the density is provided.
• Integral forming large capacity measuring fittings,Sink corrosion protection, resistance to fall, broken
• To configureSpecial wind proof and dust cover,Convenient and strong combination
• containRS-232CCommunication interface, convenient connectionPCWith the printer, can choose to buyDE-40Print measurement data
• Representative product

Electronic ceramic products, electrical ceramic products, fine ceramics, building ceramics, industrial ceramics, mechanical ceramics, zirconia ceramics,Talc porcelainproducts,silicon nitrideProducts,silicon carbideProducts,Ceramic ring, insulationCeramics,ceramic rodCeramic tube, ceramic sheet...Such representative products.

• Standard for non absorbent productsMeasurement steps:

Put the product into the measuring table and measure the weight of the air.ENTERKey memory.

Put the product into the water to measure the weight of the water.ENTERKey memory, display density value.

• Water absorbent product measurement procedure (porous material product):
• Place the product in the measuring table, measuring the weight of the air, andENTERKey memory.
• After the water treatment of the product, the weight of the air after the water treatment is put in the measuring station, and the weight of the water is measured.ENTERKey memory.
• The product is put into water to measure the weight of water after water treatment.ENTERKey memory, display density value.

• Standard attachment:

The host, the sink, the measuring table, the tweezers, the thermometer, the weight of the wind and dust cover, the measured particle accessory set, we measured a floating body parts, a power transformer.

• Technical specifications and related products

123456789