New printer head printhead cleaning kit smart clean refill tool For HP Designjet 5500/5500PS/5000/5000uv/5500 ps uv/5500uv | Компьютеры и

The new design(not afraid of mixed color):  printer head printhead cleaning kit smart clean kit refill tool For HP Printer head models: 706 831 711 789 792 761 18 70 72 73 80 81 83 88 89 90 91 940 941...

for hp Bulk Large Format printer

D5800

Latex 310 330 360 370...

T610/T620/T770/T790/T1100/T1120/T1300/T1200/T2300

Z6200 L25500 L26500 L28500 L2550 PRO L7590

Z5400 L28500 Z2100 Z3100 Z3200 Z5200...

K550/K550dn/k550dtwn; K5400/K5400dn/K5400dtn/K5400tn; K8600/K8600dn; L7400/L7480; L7500/L7550/L7555/L7580/L7590; L7600/L7650/L7680/L7681; L7700/L7750/L7780; PRO K5300; L7380; Officejet Pro 8000-A809a/A811a/A809a/A809n; Pro 8500 - A909b/A909a/A909n/A909g/A910a; Pro 8500A - A910a/A910g/A910n; Designjet 1050/1050C plus/1055 cm/1055 cm plus; T610/T620/T770/T790/T1100/T1120/T1300/T1200/T2300; Designjet 5500/5500PS/5000; Designjet 5000uv/5500 ps uv/5500uv; Designjet Z2100;Designjet Z3100ps/Z3100/Z3200;

Designjet Z6100 

Features: The maintenance device is mainly for the problem of air-entering to the print head, vertical and horizontal blank stripe printing.but it won't be helped for the problem of chip damage and electrical faults of the print head!If your HP printer head is cloged,empty or loses ink volume over time, it will no longer print correctly.Just try to use This smart tool kit to refill with ink into the printer head , it may Save and Revitalize your print head!

 With all use tool 

Selling point 1 :Finished one color to another color,not afraid of mixed color,Arrow can be seen no mixed color. Selling point 2 :  Arrow can be seen :hole only open in the ear side, so finished one color to another color, not afraid of mixed colorSelling point 3  :Arrow can be seen :Direction can be installed on both sides, the nozzle cap is installed is very strong ,so finished one color to another color, not afraid of mixed color

Selling point 4:Funnel the ink nozzle cap for conjoined, fixed well 

Printer head refill ink process is as follows 

3-4.Install the nozzle cover 

5-6. Note the ink before, must see the cartridge on the position of the ink color, go inside the funnel into the yellow ink.

7. Insert the syringe

8. After insert as shown

9-10.Upward, pumping ink out air and a bit of ink,

remove the syringe and repeated several times,

until the full of yellow ink.

11-12. Pull out the syringe,remove the nozzle cap, rinse clean.

13.The nozzle cap  to the other side

14.Repeat 5-10 steps

15. Into the ink and remove the funnel and nozzle cap, OK.