Liitokala lii-100 1.2 v 3.7 3.2 3.85 aa / aaa 18650 18350 26650 10440 14500 16340 25500 NiMH lithium battery smart charger | Электроника

Liitokala lii-100 1.2 v 3.7 3.2 3.85 aa / aaa 18650 18350 26650 10440 14500 16340 25500 NiMH lithium battery smart charger | Электроника

Lii-100 Charger Product Description: First, the charger needs and functions: 1. Using Micro USB DC 5 V input, single-slot charging and microcomputer independent management system 2. Available in two types of current load selection (500mA / 1000mA) 3. LED shows charge status 25% 50% 75% 100% and battery type NiMH 1.2 V Li-Fe 3.0 V Li-ion 3.7 V Li-Ion 3.85 V. 4. It can automatically identify lithium (li-ion) and nickel-metal hydride (Ni-MH) battery, manual iron phosphate treatment (Liepo4) and Li-ion batteries 3.85 V battery 5. There 0 V activation voltage, 1.6-2.2 V no load (but the donations will be activated flow pattern of load currents). 6. There is overcharge and over discharge, short circuit protection, intelligent detection of bad battery detection and reverse battery protection. (Note: short circuit protection, bad battery, reverse battery, charger does not work, LED is not lit) 7. Charging mode, constant current constant current 8. Using a DC input power to the charger to work 5V-1A (Micro plug) 9. a paragraph: with standard 5 V / 1000 mA output USB automatic identification, B paragraph: No USB output function Second, the description of the keys, LED and function 1. Press: under power, any time hold the Select button for 2 seconds each converter 500mA 1000mA charging current; Charge by charging battery, Select The touch button to change the type of rechargeable battery, the battery needs to be charged when the selected type (example 3 V 3.85 V) 5 seconds to enter the charging status. 2. LED: charger connected to the 5V power supply socket, charger all LED the full brightness immediately, without the battery in the charging slot, 500mA (LED) indicator light, other lights go out. After detecting a battery, four LED lights flashing, then you can tap the button to select the desired type of rechargeable batteries, if you do not choose, five seconds after entering the battery charging recognition pattern, charge indicator According to the corresponding power ratio flashes. Tap the button to see the default charge (without charge indicator) five seconds after returning to the charging status. When it is not energized, insert the battery charge can be seen ratio (5 seconds and then turn off, you need to see the press one more time) USB output indication: When detected USB output, power indicator lights come out after 10 seconds, the button can see the power. Third, the electrical technical parameters: 1, Power Input: Micro USB DC 5 V / 1A 2, the output voltage: 4.2 V ± 1% / 5 V 3, the output current: 500mA / 1000mA 4, constant voltage load, out current: <100 m; 5, the external current power supply Standby: <15.0mA; Four, USB output function: 1, USB port voltage output voltage: 4.90-5.30 V; 2, the output current: 1000mA 3, non-current load: <1mA; 4, 1000 m One charging current, the output voltage of the port: 4.75-5.25 V; 5, stop the protection of the output voltage: 3.0 ± 0.1 V; V. Compatible Battery: Li-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440 Charger Dimensions: 113mm × 38mm × 32mm (length / width / height) Weight: ** g (without battery, power cord)   Product configuration: Lii-100 charger + USB cable