QY6-0073 New & Fresh Printhead (Printer Head) For Canon IP3680 IP3600 MP620 MP540 MP558 MP568 MX868 MX878 MG5140 MG5180 Printer |

• Note: Before installing the nozzle, please ensure that the machine has no problem and no abnormal. The fault of the main board of the machine will cause the nozzle short circuit to burn down.
• Type:Printhead for Printer Replacement Parts
• Compatiblity: Compatible for Canon IP3680 IP3600 MP620 MP540 MP558 MP568 MX868 MX878 MG5140 MG5180 Inkjet Printer
• Package including: 1PK New & Fresh Printhead
• Offer you high-quality products and satisfied after-sales services
• Attention should be paid to the installation of the printhead:
  
  1.The sprinkler head is very fragile, absolutely can not bump, must protect the good. Its surface is a block of aluminum, and the inner layer is coated with a crystal oscillator and very small ink tubes. A touch will be concave, deformed, or even broken, and the nozzle will be scrapped.
  2. to install the sprinkler should be careful, it must be first cut off, and installed in place. After installed, use hands to push the car and move around, check whether smooth, do not install on electricity, because, if the head is not in place, the car is easy to hit a head and hand feeling, fragmentation, and freely, strong controllability;
  2.When connecting the plug cable, do not bring in the ink, and ensure that the socket is in good contact with the socket and does not touch the foot. Otherwise, it will cause the short circuit of the nozzle to burn down.
  4.The steel shaft also should be clean and smooth, use the paper towel to stick the lubricating oil to wipe, do not go directly to the shaft, the excess oil will flow to the nozzle and cause damage.
  5.After the mechanical and electrical circuits are correct, it is necessary to check the waterway. First, let's see the water volume in the cartridge is insufficient. Secondly, check whether the small cleaning scrapers and ink pump are dirty.
  6.Just head mounted on the inside there are air, so it will not immediately print normal, only the head of the air is completely discharged to normal Qi line; first, the available batch cleaning (only one time for cleaning 2 times, then stop for 30 minutes after washing 2 times) repeatedly kept clean, will cause cleaning pump ink, not only makes the printing color mixing, ink leakage and waste ink; secondly, can print pictures, let the nozzle exhaust air in the work

• Payment

   

  If u have any problems on payment,pls refer directly:

  http://activities.aliexpress.com/adcms/help-aliexpress-com/pay_order.php

  Shipping

  1. Shipping way:  Normally,we advise China Post Registered Air Mail which is avilable on tracking.

  2. Ship out: 1-5 days after receipt of your payment. We need time to package and deal with shipper by orders and sometimes there are holidays or weekend,pls understand.

  3. Transit Time: 10-39 days vary from different areas

    Attention: Sometimes it may delay due to some accidental problems. Pls contact us as 

  soon as possible. if you not receive the items on schedule and we’ll solve the problem till 

  you’re satisfied.

   

  Feedback

   -If you are satisfied with our product and service, thank you to leave us a 5 stars postive feedback. 

   -If you are not satisfied with our product or service, DO contact us BEFORE leaving a negative feedback. We will give you a satisfying solution. 

   If u have any problems on feedback, pls refer to : 

   

  http://activities.aliexpress.com/adcms/help-aliexpress-com/feedback_suppliers.php