Xiaomi Mijia New xiaofang Smart Home 110 Degree 1080p HD Intelligent Security WIFI IP dafang Camera Night Vision For Mi home app |

Xiaomi Mijia New xiaofang Smart Home 110 Degree 1080p HD Intelligent Security WIFI IP dafang Camera Night Vision For Mi home app |

5·If the camera has a connection timeout and the blue light of the camera is flashing, please wait 35 seconds without clicking on the phone. When the camera light shows blue directly, the camera has been connected successfully, please click on the phone to try again

Device binding timeout how to do?

Please visit the router to check Wi-Fi settings:

xiaomi router address:192.168.31.1

Other router address:192.168.2.1

                  192.168.1.1

                  192.168.0.1

1, if you are buying a millet router: enter 192.168.31.1 in the browser; other routes, please enter: 192.168.1.1 or 192.168.0.1 or 192.168.1.0;

2, after landing account, click "Common Settings" - "Wi-Fi Settings"

3, Login successfully, enter the router settings interface

4, confirm the dual-band router off one (2.4G and 5G features), this product only supports 2.4G network

5, Router name must be in English

6, this product does not support the link hidden Wi-Fi, can not hide the Wi-Fi network;

7, Network must add password, encryption the way: WPA / WPA2;

8, Routing name and password is too long, there may be binding timeout, it is recommended to shorten the password and router name try to connect

9, Router can not blacklist camera device (or, MAC address binding)

10, can not xiaomi router intrusion defense switch, open to the highest level;

11, the market part of the optical cat box with routing function, the network port is also blocked will result in binding failure, it is recommended that users use the route binding;

12, some portable WIFI on the market (360 portable WIFI) may not support device binding, it is recommended that users use routing binding;

13 If the names of the routing relay names and the main routes are the same, the connection may not be connected because the device switches the network when the two routes have different signal strengths during the connection.

14, When connecting the camera, please restart the router, connect the camera near the router, the wifi signal will be unstable over long distance, the camera can not be connected

15,Use the camera, the effective distance of the WIFI signal, (general router, open area of 10 meters, the room router walls and other obstructions will block the WiFi signal, resulting in shorter wifi signal distance, resulting in video and picture is not clear, or interrupt connection )

16,Can not open WI-FI dual-band one (2.4G and 5G will use the same name after opening, the router will automatically select the best wifi network, the short-range signal, switch to 5G network, Remotely signal, switch to 2.4G network , Due to differences in terminal equipment, automatically switch the signal, resulting in network disruption, or have been connected to the camera, video and image, is not clear, the camera connection signal is bad, and other issues) 

17, Other ways to set the router much the same, do not understand can ask router service providers