ZLAN9100 industrial Ethernet to Optical Fiber Photoelectric Converter single-mode single-fiber 10/100M converter | Безопасность и

ZLAN9100 industrial Ethernet to Optical Fiber Photoelectric Converter single-mode single-fiber 10/100M converter | Безопасность и

ZLAN9100  Ethernet to Optical Fiber / Photoelectric Converter

• Can convert single-mode single-fiber signal to 10/100M Ethernet electrical signal
• Industrial grade design: 9～24V power supply, terminal style, industrial grade temperature, can be equipped with guide installation accessories.
• Single-mode single-fiber optical fiber: only need to be equipped with one transmission optical fiber, save cost.
• Twisted-pair cable can up to 100m; Single-mode fiber can up to 20km.

Summary

ZLAN9100 optical transceiver is a photoelectric conversion device for converting 10M/100M Ethernet electrical signals into optical signals or optical signal into 10M/100M Ethernet signal. Through converting electrical signals into optical signal then transmission in single-mode fiber, it breakthroughs the limitation of the cable short distance, makes the Ethernet can use fiber medium to achieve the long distance transmission of several kilometers to hundreds of kilometers in guarantee under the premise of high bandwidth transmission.

ZLAN9100 has two special advantages:

1) Design for industrial applications. Power supply can be plug or two-wire terminal, the input voltage can achieve 9 ~ 24V wide voltage input.

2) Single-mode single-fiber fiber connection. This can be compared with the dual-fiber converter, you can save fiber costs of long-distance transmission.

The ZLAN9100 can be applied to: a variety of applications that require to extend the distance of industrial Ethernet transmission via fiber; it can also be used in areas where Ethernet devices and optical switch devices need to be connected.

Features

1) 1 Ethernet port RJ45 and a single fiber SC optical port, to achieve the photoelectric signal conversion between twisted pair and optical fiber;

2) In line with IEEE802.3 10Base-T and IEEE802.3u 100Base-TX, 100Base-FX standard, can be interconnected with other products;

3) With 10M / 100M adaptive capacity;

4) Electrical port can be adaptive straight line/cross-line connection;

5) Support full duplex/half duplex mode;

6) Support IEEE802.3X full-duplex flow control and half-duplex back pressure flow control;

7) Built-in efficient exchange kernel, to suppress broadcast storms, to achieve flow control, CRC error check;

8) Twisted pair up to 100 meters; single-mode fiber up to 20 km;

Technical Parameters

Figure

Interface:  Fiber Interface: Optical SC pluggable interface

Power Supply:  5.5mm, Inside positive outside negative, standard outlet/terminal

Size:  L x W x H =9.4cm×6.5cm×2.5cm

Communicate Interface

Ethernet:  10M/100M, 2KV surge protection

Optical Fiber:  Single-mode Single-fiber, double transferring

Optical Fiber Parameters

ZLAN9100-3（A-end） Emission (TX) Wavelength 1310nm; Receiving (RX) Wavelength 1550nm

ZLAN9100-5（B-end）Emission (TX) Wavelength 1550nm; Receiving (RX) Wavelength 1310nm

Optical Fiber Transmission Distance:  20Km

Optical Communication Interface:  SC

Power  9～24V DC，165mA@9V

Environment

Running temperature   -40~85℃

Storage temp   -40~165℃

Humidity   5~95%RH