FGHGF Zoom in 1-500 times USB microscope Electronic magnifier PCB Diagnostic Tool SMT Collection identification archeology | Инструменты

FGHGF Zoom in 1-500 times USB microscope Electronic magnifier PCB Diagnostic Tool SMT Collection identification archeology | Инструменты

A; use a new aluminum lens; even if you are in a high temperature environment, do not be careful about lens damage and mirror blur. Second; the use of imported lenses, more effective to ensure a real high temperature picture, can be used continuously for up to 48 hours. Three; new software, perfect support for WIN8, WIN7 system, (need to install the driver), there is no driver under XP, Lifting bracket, can adjust the height up and down, can be fine-tuned, 3 microscope upgrades are doubled, 1 times - 500 times. Solved the problem of difficulty in concentration! Cost-effective!   500x HD USB microscope, large microscope, can see 10 cm at the farthest. Optical zoom + digital dynamic zoom Amplify 500 times of high-definition screen, built-in 8 high-brightness white LED lights, with measurement software, with ruler, adjustable light, can take photos, can zoom 500 times the angle of view, give you a microscopic world you have never seen before!   Upgraded 500 times electron microscope freshly listed friends, solved the shadow of the old machine four corners, color purple problem, using imported Korean Danyuan professional microscope, the display effect is more transparent and true. If you need to use the measurement software, please open the CD, update the CD on the WIN system to version 2.0 and above, and then install GAOSUO. Measurement software gives the computer an accurate measurement! The installation process is shown below! First of all, the software display interface window size is available for selection. The system defaults to 640 * 480 display. Instructions for use: First, plug in the USB interface. Second, install the driver. Third, open the "MicroCapture" from the "Start" menu "USB Digital Microscope"; then you can start the operation (first installation settings: open the software options menu preview). Fourth, place the microscope in the area to be enlarged (on the surface of the product). Fifth, adjust the rotary axis to the appropriate focus. Sixth, save the picture as (JPG or BMP). In the seventh step, double-click the picture to be taken to open the measurement tool to be measured. Product specifications: 1, image sensor: 1.3 million pixels. (2 million pixels) 2, controller: high speed DSP. 3, lens: 500 times microlens (1-500 times) 4, focal length range: adjustable, 5, taking pictures: software and hardware (may). 6, video capture image pixels: 1600x1200 (2 million pixels), 1280x1024 (1.3 million pixels), 1280x960, 1024x768, 800x600, 640x480, 352x288, 320x240, 160x120. 7, lens speed: 30f / s, under the light of 600 lux of light. 8, flash control: 50Hz / 60 Hz 9, video format: AVI 10, light source: white LED light eight, you can switch, or adjust the picture brightness in the software interface. 11, magnification: 500 times 12, power: USB interface (5V DC) 13, software compatibility: TWAIN / VFW, etc. 14, hardware requirements: Petium and above, 20M hard drive, CM ROM drive, 128MB memory, Direct X VGA card. 15, computer interface: USB2.0 and USB1.0 16, operating system: Windows 98SE / ME / 2000 / XP / Vista 17, product size: 112MM (long) x33MM (diameter) 18, accessories: a bracket, an English manual, CD drive, neutral box.