1Pair Black Motorcycle Handlebar Three-Speed Adjustable Switch Heating Grips Set Universal waterproof | Автомобили и мотоциклы

1Pair Black Motorcycle Handlebar Three-Speed Adjustable Switch Heating Grips Set Universal waterproof | Автомобили и мотоциклы

1Pair Black Motorcycle Handlebar Three-Speed Adjustable Switch Heating Grips Set Universal waterproof Motorcycle Handlebar Description: Highlights:
1. Installation is super simple: after installing the throttle, the lead elbow of the right hand is aligned with the throttle puller column and it is OK. Use the cable tie to gently bundle the elbow with the pull wire column. Improve the old accessories too much to install too complicated problem.
2. The first anti-offset: use the anti-off-loop anti-handle to pull out, because it will not be more flexible than the eccentric rotation. Improve the old model with the iron ring fixed handle, the screw loose and easy to escape, the screw is tight and the eccentricity will be inflexible.
3. Aluminum ring hoop fastening: The left hand holds the aluminum hoop hoop to fix it more firmly. It is safer to exercise. The old model is iron plate fixed and easy to swing.
4. The wire does not turn with the fuel: the right hand electric wire and the power supply wire are spring-loaded, and the joint solder joints are all soldered to ensure waterproof and anti-corrosion.
5. Ultra-thin turntable: The left and right hand turntables are thinner and more beautiful, and it is more convenient to press the speakers.
6. The product is supplied with the handlebar plugged. After installation, the handle is plugged, which is more beautiful.

Feature:
1. The wire does not rotate with refueling, and the service life is longer and more convenient;
2. No sliding contact, spring-loaded technology, the handle is more flexible;
3. Hand-integrated injection molding, waterproof, dustproof, longer service life and safer;
4. One handle can be applied to 22mm and 25 direction models;
5. Split single and double 360 degree throttle design;
6. The electric hand truck has a universal design and is suitable for a wider range of models.

Specification:
Product Name: Electric Handlebar Grip
Product material: Imported Nylon, Soft plastic TPU Environmental Protection
Handle Length: Left hand handle: 14.5cm; Right hand handle: 15.1cm
Handle Diameter: 2.2cm
Input voltage: 12V
Product power: 25W a pair of power.
Handle temperature: 50 -70 degC adjustable
Switch type: Three-Speed Adjustable Switch
Applicable models: Applicable handlebar diameter 22MM motorcycle handlebars

Installation Method:
1. The oiler is installed in the throttle seat: the oiler is installed in the throttle seat, the throttle cable is attached, and the cover is closed. Then the right handle is inserted into the oiler for flexibility. It is not flexible to polish the oiler.
2. Insert the Yamaguchi oiler with the right hand: coarse positioning: Align the anti-turn elbow of the right handle with the throttle puller column or other position basin of the front, insert the right handle so that the elbow rests on the puller column, mark the intrusion position cover. Fine positioning : At the mark, change the cogging multiple times to try, even if the elbow does not rotate and make the corner moderately does not affect the car refueling. The right-hand design of the idle angle does not exceed 120 degrees, generally adjusted to 75--90 degrees to meet the car Refueling. The stepping angle of the tooth groove is 15 degrees.
3. Install the anti-detachment ring into the throttle seat. Insert the right handle into the oiler. The anti-offset must be installed in the throttle seat! The anti-offset is to prevent the right handle from coming out of the fuel holder and cause a safety accident. Individual scooter cars The shell will be inserted between the right handle and the oiler. At this time, the anti-detachment ring cannot be installed in the throttle seat. The 502 rubber should be dropped at the connection between the oil filler and the anti-detachment ring to prevent the right handle from coming out. Prevent the flow from entering the hand and turning the shadow.
4. Tilting installation to extend life: tilt the left switch to install rainwater to extend the life of the switch. Poor contact of the switch can be repeatedly pressed by the gasoline. Use the blades to remove the button to scrape the contact corrosion and clean with gasoline.
5. DC power supply model connection: DC model features headlights are powered by the battery. Shirong hands the black line positive, connected to the 12 volt line on the faucet lock. The line must be able to turn off the power when twisting the faucet lock. If the power cannot be turned off, the battery will be depleted when the handle switch is forgotten. The green line of the handle is negatively connected to the negative pole of the vehicle.
  Package Includes: 1 Pair x Electric Handlebar Grip