Car Refit Intake Pure Carbon Fiber Bellows Set Air Filter High Flow and Efficiency Mushroom Head | Автомобили и мотоциклы

Car Refit Intake Pure Carbon Fiber Bellows Set Air Filter High Flow and Efficiency Mushroom Head | Автомобили и мотоциклы

product manual   1. A pure carbon fiber bellows   2. One telescopic tube (1 meter long after stretching)   3. Three PVC reducer adapters, specifications are: 76-60, 76-63.5, 76-70mm   4. A rhubarb hoop with a set of screws   5. 3 stainless steel clamps, size: 65-92mm   6. One bracket (thick)   7. 2 wire ties   8. Turbine   effect:   1, low noise, improve horsepower   2, carbon fiber casing, not only lightweight, beautiful, and can effectively block the gas   3, the internal wind net of the mushroom head can be cleaned and reused 4, inside is a dedicated dual intake high flow wind network   5, suitable for all models   Features:   1. Effectively improve the high-speed torque output in the engine.   2. The throttle becomes lighter.   3. Save fuel. The intake air increases the combustion of the engine mixture more completely, reaching the farther distance of the same fuel.   4. Improve the smoothness of driving. The use of the gas collecting box design, storing a large amount of fresh air, can effectively improve the frustration caused by insufficient intake air in the case of ordinary oil return, and make the driving smoother.   5, reduce engine carbon deposits, protect the engine to extend life.   6, can be used repeatedly for cleaning, is a cost-effective power conversion products!   description: The carbon fiber air intake bellows is specially designed for the naturally aspirated NA car to be customized; the air intake filter system can safely increase the intake air volume! The air filter to the air intake duct are all strictly constructed, and the cylindrical gas cylinder made of carbon fiber material is characterized by its firmness, light weight and heat insulation, so that the intake air temperature is completely unaffected by the high temperature of the engine room. The unique dual-intake high-flow filter element and the front intake duct in the gas cylinder can directly inhale the cold air outside the vehicle body, effectively reducing the suction resistance, plus the front-collision pressure boosting design; generating high-pressure airflow and increasing the output of the engine horsepower. Improve air intake efficiency and horsepower and torque performance!   Usually we drive mainly in the city, the main pursuit is the performance of low-speed torque! So I recommend using this carbon fiber gas collecting bellows! If you are a naturally aspirated car with a mushroom head to replace the original car air filter, to increase the efficiency of the intake and thus improve the power. That's right, because the mushroom head is a 360-degree air intake area plus a high-flow air intake filter, the high-speed performance is really good; but low speed? Of course it is not so good; so I recommend using this high-designed carbon fiber air bellows. "Using the internationally popular conical diversion intake structure, increasing the windward area, maximizing the intake resonance, reducing the intake noise, using a special fiber filter, fully providing the cleanliness of the intake air and reducing the intake resistance. The horsepower can be flexibly bent. The air intake duct pipe is made of a new composite material with good durability. The fittings include 2 flexible rubber tubes, 3mm thick fixed brackets, 1 bellows body fixed hoop, and 2 strong clips. It guarantees the stability and durability of the use process, and is suitable for installation and use of various types of vehicles. In order to improve the efficiency of intake air, it is necessary to remove the items that may cause blockage, so that the air can smoothly enter the engine. Replace the original air filter; replace the high-flow air collection bellows.