Chargery BMS8T BMS 2S 4S 6S 7S 8S 600A Shunt For Li-ion LiPo LiFePo4 LTO with 1.2A Balance SOC Display Winston CALB Battery Pack |

Chargery BMS8T BMS  2S 4S 6S 7S 8S  600A Shunt For Li-ion LiPo LiFePo4 LTO with 1.2A Balance SOC Display Winston CALB Battery Pack

Note:After the order is placed, we do not accept the cancellation of the order, so please carefully consider before placing the order.

​Chargery BMS8T is designed special for LiPo,LiFe and LiTo battery pack applied to storage energy system and

Electrical Vehicle including E-Motorcycle, E-Scooter and so on. The unit can measure or detect the battery voltage,
cell voltage, charge & discharge current, battery temperature, and battery SOC (State of Charge) , displayed with
TFT color LCD.

All standard accessories are listed,
includes:
1.  Battery balance wire, 1pcs
2.  Relay controller wire, 1pcs
3.  Temperature wire, 1pcs
4.  Current sensor wire, 1pc
5  USB data cable, 1pcs
6.  Communication wire on COM2, connect main unit
to display module, 1pcs
7.  Communication wire on COM3, connect BMS to
external device, 1pcs
8.  Warning LED, 1pcs
9. Warning beeper, 1pcs

10. 600 shunt,1pcs

Special Features
1.  The BMS8T uses advanced ADC measurement technology, high accuracy, high voltage and high current
detection circuit. The maximum voltage measurements tolerance is within 5mV at up to 8S LiPo battery
(34V)
2.  Support regenerative braking, during braking operation can charge the batter pack and the discharge power
(Wh) will decrease to response to the braking power.
3.  Charge/discharge current up to 600A. Bigger current can be customized.
4.  1.2A per cell balance current is very useful for large capacity battery pack, the feature can resume all cell
voltage balance status at the shortest time. Over temperature protection make sure the system safety
during balance.
5.  BMS8T calculate and display the charge and discharge power (Wh), generally the battery rated power is
rated voltage multiply rated battery capacity.
6.  TFT LCD screen provides rich information including current, voltage, power, capacity, battery status, SOC
and temperature and so on.
7.  BMS8T features a maximal safety protection, within the range parameters can be setup, BMS8T will alarm
and cutoff charge or discharge according to users’ setup, out of range of parameters, and trigged absolute
maximum ratings BMS16T will force to cutoff charge or discharge to prevent the battery from fire.
8.  Minimize the power consumption by draw current from all cells or external power supply.
9.  Dual power design, the unit can be powered by all cells or external power supply.
10. Detect cell count at any time, and compare with the count detected when switch on first time. If it is not
uniformity, the device will alarm and cutoff charge or discharge according to users’ setup, the feature can
prevent any cell connection from loosing.
11. Sound alarm and LED alarm will be triggered when any warning events happened, and then wait several
seconds cut off or Don't cut off charge or discharge. The delay time can be programmed.
12. Charge relay and discharge relay are controlled independently.
13. Two temperature sensors monitor battery temperature on different position.
14. Supports upgrading the firmware program by USB port.
15. BMS8T provide users the maximal flexibility, key parameters can be programmed.
16. BMS8T display battery SOC or called battery gauge similar with car dashboard. Cell count, battery pack
voltage and battery gauge (%) is displayed simultaneously.
17. In case that the battery pack need not be charged and discharged, Press STOP button enter into sleep mode
to save energy consumption, at this mode, Charge and Discharge is forbidden, and LCD back light is off.
Press any key to resume normal work mode.
18. LCD back light ON time can be programmed to save energy, when it is OFF, press any key to resume “ON”.
Protection functions
1.  Cell count error protection
2.  Over charge protection
3.  Under voltage protection
4.  Over current protection when charge or discharge
5.  Over temperature protection
6.  Over differential cell voltage protection
7.  Over differential battery temperature protection
8.  Under SOC protection

Specifications
1.  Battery range: 2S-8S LiPo & LiFe, LTO battery pack on BMS8T
2.  Accurate scope of the cell voltage: -5mV/+5mV on BMS8T
3.  Cell Voltage display range: 0.10~4.99V
4.  The voltage of external power：15-60V
5.  Balance current:1.2A per cell
6.  Temperature display range:-20℃~150℃,
7.  SOC indicator:
RED area @ 0~15% of SOC
YELLOW area @ 16~35% of SOC
GREEN area @ 36~100% of SOC
8.  Main module Size: 122×80×28 (L×W×T, mm) or 4.8×3.2×1.1(L×W×T, inch)
9.  Main module weight: 365g excluding accessories
10. Display module size:96×80×24 (L×W×T, mm) or 3.8×3.2×0.95 (L×W×T, inch)
11. Warning LED: 11000mCd, @ 2.0V, 20mA
12. Warning beeper: 85dB @ 12V, 25mA
13. Package: AL alloy case

You also buy our 1S , 4S , 5S or 8S balance module to use with the BMS together.

Shipping

All the items will be dispatched within 5 business day after the payment received. Items will arrive in 3-28 business days. The arrival time depends on some factors and different areas:

Please choose some local sellers, if you cannot wait patiently in the shipping time we declared. Once you purchase, please DON’T leave negative or neutral feedback if you haven’t received item in 30 days, because we have mentioned the shipping time repeatedly.

Customs duty is obligation and liability of a citizen in your country, so buyer should be responsible for any tax and custom duty incurred. For example, Laser Pointer is unacceptable in some countries. Therefore, please double check your local customs policy carefully before purchase. Or, we will NOT be responsible for any failure delivery related destination customs issue.

For Remote areas customer,you need to consult other freight price before you buy the product.

Warranty

1. We offer the 1-month free replacement.  Buyers may request for a replacement within 15 days from your receipt of the product. The buyer should return the product in the original conditions to us and should bear the shipping costs for return. 
2. We also provide 12-month free maintenance.  The buyer should return the product in the original conditions to us and should bear the shipping costs for return.  If any part is required to be replaced, the buyer should also pay for the costs of the parts to be replaced.
3. Before returning the items, please confirm the return address and the logistics method with us. After you give the items to the logistic company, please send us the tracking number.  As soon as we receive the items, we will repair or exchange them ASAP.

Contact Us

If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week.
We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Please DON’T leave negative or neutral feedback if you haven’t received item in 30 days, because we have mentioned the shipping time repeatedly.