Silk Screen Mosaic Tile Stickers PVC Waterproof Self Adhesive Wall Furniture Bathroom DIY Removable Room decoration | Дом и сад

---

Material: PET+PU

Goods number: T80504 Fabric main component: PU Fabric main component content: 60 Fabric sub-component: paper Fabric sub-component content: 40 Level: Principal Style: European modern Use (construction) instructions Step 1: First determine the location where you want to install the wall sticker, then clean the wall to make the wall clean and tidy. If you are new or wet, please do not post it, wait patiently for drying and then post it. Step 2: When installing the first wall sticker, find the baseline and make sure to align the horizontal line. This will facilitate the installation of the rest. Please be patient, the better the effect of your display, the better. When you want to remove the wall sticker from the bottom paper, you should lift it from its four corners. Place the exposed part of the water on the wall. At the same time, press and hold the adhered part, continue to slowly remove the remaining base paper, and while pressing and pressing the wall sticker, until the entire piece of paper falls off, the first piece is installed. Step 3: For the second wall sticker and the remaining products, the overlapping installation of the edges is based on the previous interface. Each wall sticker has its own corresponding interface. After each installation, an interface is left to overlap the next wall sticker. You cannot install the product directly without the interface. Step 4: When encountering a corner or when facing from one side of the wall to the other, you cannot fold the wall sticker. Please measure the distance between the last wall sticker and the corner and cut the appropriate size for installation. Step 5: Use a sharp knife to cut through the ruler. At the overlap interface, you can put pressure on it for installation. When installing against a corner, it is also necessary to press hard. Step 6: A more important feature, transferable performance: When the sticker is attached to the glass or flat surface, when the surface is peeled off again, there is no glue residue surface or the glue is damaged; and the sticker can be effectively pasted again. However, if there is no special reason, do not paste it repeatedly to avoid affecting the effect of the wall sticker.