Carchet For VAUXHALL SAAB ALFA Z19DTH 1.9 CDTi TiD JTD INLET INTAKE MANIFOLD SWIRL FLAP ROD Intake Manifold Swirl Flap |

Carchet For VAUXHALL SAAB ALFA Z19DTH 1.9 CDTi TiD JTD INLET INTAKE MANIFOLD SWIRL FLAP ROD Intake Manifold Swirl Flap |

Hello! Welcome to our store!
Quality is the first with best service. customers all are our friends. Fashion design,100% Brand New,high quality! The bearing bushes on the swirl flap operating rod wear and the rod pops off causing the symptoms noted above. All of these symptoms can be caused by the swirl flap operating rod bushes wearing making the operating rod pop off; stopping the swirl flaps from operating, you will often see the rod lying on top of the intake manifold. Replace the bearing bushes on your swirl flap operating rod with our improved design bearing bushes and refit your operating rod- permanently. Rather than replacing the intake manifold at great cost and the problem reoccurring in the future our repair kit solves this issue, replace the unreliable bush bearings with our improved design bearings which will not fail again.

There is 2-3% difference according to manual measurement.

please check the measurement chart carefully before you buy the item.
Please note that slight color difference should be acceptable due to the light and screen.

What You Get:
4x Brass bushes with Viton O-rings

Preview: