Новое поступление
Магазина TxHang Store работает с 16.12.2014. его рейтинг составлет 90.56 баллов из 100. В избранное добавили 8008 покупателя. Средний рейтинг торваров продавца 4.6 в продаже представленно 5518 наименований товаров, успешно доставлено 176870 заказов. 3262 покупателей оставили отзывы о продавце.
Характеристики
*Текущая стоимость 331.34 уже могла изменится. Что бы узнать актуальную цену и проверить наличие товара, нажмите "Добавить в корзину"
Месяц | Минимальная цена | Макс. стоимость | Цена |
---|---|---|---|
Aug-16-2025 | 420.49 руб. | 428.10 руб. | 424 руб. |
Jul-16-2025 | 341.76 руб. | 348.83 руб. | 344.5 руб. |
Jun-16-2025 | 414.50 руб. | 422.86 руб. | 418 руб. |
May-16-2025 | 410.16 руб. | 418.24 руб. | 414 руб. |
Apr-16-2025 | 328.74 руб. | 335.95 руб. | 331.5 руб. |
Mar-16-2025 | 404.76 руб. | 412.9 руб. | 408 руб. |
Feb-16-2025 | 401.17 руб. | 409.90 руб. | 405 руб. |
Jan-16-2025 | 397.47 руб. | 405.36 руб. | 401 руб. |
Описание товара
MAX4466
Product Description
Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use the Maxim MAX4466, an op-amp specifically designed for this delicate task! The amplifier has excellent power supply noise rejection, so this amplifier sounds really good and isn't nearly as noisy or scratchy as other mic amp breakouts we've tried!
This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. On the back, we include a small trimmer pot to adjust the gain. You can set the gain from 25x to 125x. That's down to be about 200mVpp (for normal speaking volume about 6" away) which is good for attaching to something that expects 'line level' input without clipping, or up to about 1Vpp, ideal for reading from a microcontroller ADC. The output is rail-to-rail so if the sounds gets loud, the output can go up to 5Vpp!
Using it is simple: connect GND to ground, VCC to 2.4-5VDC. For the best performance, use the "quietest" supply available (on an for Arduino, this would be the 3.3V supply). The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled). If the audio equipment you're using requires AC coupled audio, place a 100uF capacitor between the output pin and the input of your device. If you're connecting to an audio amplifier that has differential inputs or includes decoupling capacitors, the 100uF cap is not required.
The output pin is not designed to drive speakers or anything but the smallest in-ear headphones - you'll need an audio amplifier (such as our 3.7W stereo amp) if you want to connect the amp directly to speakers. If you're connecting to a microcontroller pin, you don't need an amplifier or decoupling capacitor - connect the OUT pin directly to the microcontroller ADC pin.
For audio-reactive projects, we suggest using an FFT driver library (such as the one in this library) which can take the audio input and 'translate' it into frequencies. Also, check out this awesome Voice Changer project that uses this mic and an Adafruit Wave Shield!
MAX9814
Specifications:
1. Supply Voltage: 2.7v-5.5v @ 3mA current
2. Output: 2Vpp on 1.25V bias
3. Frequency Response: 20Hz - 20 KHz
4. Programmable Attack and Release Ratio
5. Automatic gain, selectable max from 40dB, 50dB or 60dB
6. Low Input-Referred Noise Density of 30nV/
7. Low THD: 0.04% (typ)
Drop Shipping Service.
1.There is no limited stock to fulfill the orders on a daily basis.2.For USA/CA /RU the shipping speed is very fast.3.Priority delivery,fast delivery in 48 hours.4.No invoice or receip or promotional materials included.
5.Support CSV/EXCEL ( larger orders) discount.
Смотрите так же другие товары: