BC led Brightness dimmer RF wireless remote dimming/CCT/RGB/RGBW Touch panel controller for LED Strip Light lamp DC12V-24V | Лампы и

BC led Brightness dimmer RF wireless remote dimming/CCT/RGB/RGBW Touch panel controller for LED Strip Light lamp DC12V-24V | Лампы и

           Welcome to use this P series touch panel controller, This P series touch panel controller is consist of Multi-zone series and Single zone series, it is wildly used for commercial/office/household lighting, workable for dimming, color temperature, RGB and RGBW control. P5,P6,P7 and P8 are DMX512 control panels, used for DMX512 lamps; P series could satisfy the controlling demand for all kinds of LED lighting products.

Feature function:
1.Fashionable appearance, simple operation, standard 86 style socket, easy to install and disassemble.
2.Workable for dimming, color temperature, RGB and RGBW control.
3.RGB/RGBW panel controller with the 10 built-in changing modes, with 4096 grey scales per channel, led lamp is more rich and vivid without flash.
4.Single zone series can compatible with T series wireless remote control in long distance.

Model: P1 Dim / P2 CCT / P4 RGBW Panel
Input Voltage: DC12V-24V
Load Current: 4A×4CH Max 16A
Grey Scale Level: 4096×4
Dimming Range: 5%-100%
Max Output Power: 192W/384W(12V/24V)
Working Temperature:  -20°C~55°C
Dimensions: L86×W86×H36(mm)
Weight(N.W): 190g

Model: P3 RGB Panel
Input Voltage: DC12V-24V
Load Current: 4A×3CH Max 12A
Grey Scale Level: 4096×3
Dimming Range: 5%-100%
Max Output Power: 144W/288W(12V/24V)
Working Temperature:  -20°C~55°C
Dimensions: L86×W86×H36(mm)
Weight(N.W): 190g

Model: Wireless Remote(T1/T2/T3/T4)
Working Voltage: 3V(CR2032)(not include)
Working Frequency: 433.92MHz
Remote Distance: 40m-50m
Working Temp: -20-55℃
Dimensions: L106×W56×H9(mm)
Weight(N.W.) : 40g
 

P1/P2/P3/P4

T1/T2/T3/T4

The Leaning ID Method Remote Control:
Remote control has been matched to the receiver before leave factory ,if deleted accidentally,you can lean ID as follow.
Leaning ID:Press ID learning button on the receiver until the running light is on,then press any key in the remote cintrol,
the running light flashes several times,aclivated.
Cancel ID:Press ID learning button on the receiver for 5 secondes

.

Notice:
The remote control will enter dormant status without operation for 30 seconds, please press any key to reactive it.

Kindly reminder
Power Source Selection
Power Source must be DC constant voltage of power supply.Due to the efficent
output in some power supplies are only 80% of total,so please select at least 20% higher output power supply than the cinsumption