DC12V-48V 1CH Wireless RF Remote Control Light Switch 30A Relay Output Radio Receiver Module+Transmitter Can Time delay | Обустройство

DC12V-48V 1CH Wireless RF Remote Control Light Switch 30A Relay Output Radio Receiver Module+Transmitter Can Time delay | Обустройство

1. Specifications:  

​ Operating Voltage: DC12V-48v

Operating Frequency:  315MHZ/433MHZ

Working mode:jog/Non-Latched ；inter-lock/Latched ；self-lock /Self Latched；Can Time delay

​Maximum load: 1200w

Output Current: ≤ 30A

Receiver Sensitivity: ≥-105dBm

Operating Temperature: -40°C ~ +80°C

PCB Size: 82MM*50MM*30MM 

2.About Working mode:

 ​Learning the code :( jog/momentary)

Long press the learning button for 3 seconds , it comes into momentary setting mode . Immediately after the red light is on, press the button of the remote control, and the flash of the indicator goes out, which means "momentary mode" successfully learned

Learning the code : ( self-locking/Toggle )

Long press the learning button for 2 seconds , it comes into Toggle setting mode . Immediately after the red light is on, press the button of the remote control , and the flash of the indicator goes out, which means "Toggle mode" successfully learned

Learning the code :(interlock/Latching )

Long press the learning button for 3 seconds , it comes into Latching  setting mode . Immediately after the red light is on, press the A button of the remote control For the open,The indicator light flashes twice and stays on. Press the B key For the close again. which means "Latching  mode" successfully learned

​3.Delay function:

Delay 5 seconds: short press the learning button for 3 times, press the remote control button immediately after the red light stays on, and the flash of the indicator goes out, which means the "delay 5 seconds" mode is successfully learned

Delay 10 seconds: short press the learning button for 4 times, press the remote control button immediately after the red light stays on, and the flash of the indicator goes out, which means the "delay 10 seconds" mode is successfully learned

Delay 15 seconds: short press the learning button for 5 times, press the remote control button immediately after the red light stays on, and the flash of the indicator goes out, which means the "delay 15 seconds" mode is successfully learned

Delay 20 seconds: short press the learning button for 6 times, press the remote control button immediately after the red light stays on, and the flash of the indicator goes out, which means the "delay 20 seconds" mode is successfully learned

4. remove code:

Long press the study button until the indicator light is on.

pacote inclued:

A:

1x Receiver(with cover)

3x Transmitter(with battery)

E:

4x Transmitter(with battery)

F:

5x Transmitter(with battery)

H:

6x Transmitter(with battery)

J:

8x Transmitter(with battery)

K:

10x Transmitter(with battery)

L:

12x Transmitter(with battery)