ABGN Hot-Plc Programmable Controller Dc 24V Plc Regulator Fx1N-20Mr Industrial Control Board Logic | Электроника

ABGN Hot-Plc Programmable Controller Dc 24V Plc Regulator Fx1N-20Mr Industrial Control Board Logic | Электроника

We offer discount for large quantity. Welcome to contact with us!

Motor Type:DC Motor; Model Number:PLC Regulator; Motor Type:PLC controller; Colour: Black; material: metal; Attributes:programmable controller; Effect:programmable logic controller; pplication:industrial control board;Model:FX1N-20mr; Working Voltage:DC24V; Wide Power Supply Voltage:10-28VDC;
Features:This programmable logic controller uses industrial-grade 32-bit MCU with strong anti-interference and faster speed.High quality chip, stable performance, on-line download, on-line monitoring, automatic save when power off.Programming port is the port for program upload, download, test and monitor.It is reusable, stable, easy to learn. The PLC transmission baud rate is 9600.
Specifications:Baud Rate: 9600; Programming Software: for GX-Developer, for GX-work2.Size: Approx. 86 x 73 x 20mm / 3.4 x 2.9 x 0.7inch; Weight: 120G;Module function:This module is programmable control, can achieve thousands of functions, stable and reliable working performance.
built-in watchdog timer circuit, to ensure that the module for a long time to run!Some of the common features are shown as follows:Turn on the power supply, the relay 1 is closed for N seconds and then disconnect the relay 2 for N seconds.When the power supply is turned on, the relay 1 is switched off after N seconds, and then the relay 2 is closed for N seconds and then is turned off.
The power supply is switched on, the relay 1, 2 have no action, when a signal or trigger button, relay 1 closed off after N seconds; then relay 2 closed off after N seconds, until the next trigger, repeat the same action.Through the signal 1, 2 programming, the control can be achieved on the relay 1 and 2 arbitrarily.
When the signal 1 has a signal, the relay 1 is closed, the relay 2 is disconnected; when the signal 2 has a signal, the relay 1 is turned off, and the relay 2 is closed.
Can be connected to the NPN sensor signal, the sensor signal programming, to achieve arbitrary control of the relay.
When the signal 1 is triggered, the relay 1 is controlled, and when the signal 2 is triggered, the relay 2 is controlled.
Turn on the power supply, the control motor is turning N seconds, and then reverse N seconds, followed by the cycle.
When the signal 1 has a signal, the motor is controlled to rotate; when the signal 2 has a signal, the motor is reversed.
Input high speed pulse C235, C251 and FX1N compatible.
Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc,.
Precautions for use:
The PLC with two programming port. The 232 interface, you can directly use the USB-232 serial port with a computer to download the program directly. The TTL interface.
Built-in Analog input AD, corresponding to internal data register D5030.(Not D8030)
Built-in Analog output DA, corresponding to internal data register D5101.
When the PLC need to connect with the press screen or text, can be used to connect 232 programming port.
Package Included:
1 x PLC Board
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.