Digital DC 12V Home Automation Programmable Cycle Delay Timing Timer 30A Time Relay on off Switch Loop Module 0.01 sec - 999 min |

Digital DC 12V Home Automation Programmable Cycle Delay Timing Timer 30A Time Relay on off Switch Loop Module 0.01 sec - 999 min |

Description

1. New upgrades to simplify,to meet customer needs. 2. The use of opto isolated input and output,enhanced anti-jamming capabilit consumption. 3. Set parameter after power for ever memories. 4. Signal terminal voltage signal can be maintained for a longtime. 5. To ensure stability,industrial grade board,class PLC. 6. 24 kinds of commonly used functions to meet more application needs; can control the solenoid valve, water pump, motor, light belt, etc. to run freely 7. With LED Digital Display

Features:

1: 24 kinds of commonly used functions to meet more application needs; can control the solenoid valve, water pump, motor, light belt, etc. to run freely 2: Input voltage: DC 12V 3: Output power: DC or AC load can be controlled within 30A 4: Delay time range: 0.01 seconds (10ms) To 999 minutes adjustable at any time (0.01 seconds to 9.99 seconds / 0.1 seconds to 99.9 seconds / 1 second to 999 seconds / 1 minute to 999 minutes adjustable at any time)

Function List: Function Buy Back can be set arbitrarily

"Signal" in the list: it can be the "Start/Stop" button (the last button )on our panel, or an external trigger

Working mode selection:After power on,long press "Settings" button (the first button) on our panel for 2 seconds later into the select function mode,P-11~P-38 for choose.

P-11: Jog (to signal relay pulls, signal disappears relay stops) P-12: Self-locking (For a signal relay to pull, and then give a signal relay to stop) P-13: For the signal, the relay will stop automatically for A seconds; the trigger will be invalid during the delay. P-14: For the signal, the relay will stop automatically for A seconds; trigger the re-timing during the delay P-15: For the signal, the relay will stop automatically for A seconds; trigger the superposition timer during the delay P-16: For the signal, the relay automatically stops for A seconds and triggers a reset during the delay. P-17: For the signal, the relay pulls in, the input signal is disconnected, the power is turned off after A seconds, and the signal is output again during the delay period, and the timing is stopped. P-18: After the power is turned on, the relay pulls in immediately and the power is turned off after the delay of A seconds; until the next power on P-21: To signal, relay delays after A seconds P-22: When the signal exceeds A second, the relay pulls in, the signal disappears, and the relay stops. P-23: When the signal disappears more than A second, the relay pulls in, the signal disappears, and the relay stops. P-24: After the signal exceeds A seconds, the relay pulls in. After the signal disappears for more than A second, the relay stops. P-25: After the signal exceeds A second, the relay pulls in. After the signal exceeds A second, the relay stops. P-26: There is a signal. The relay stops after A seconds. The signal disappears. The relay stops after A seconds. P-27: Detection of pulse signal, relay stop; no pulse signal, relay delay A second pull-in; (signal persists or signal disappears as no pulse signal) P-28: After power-on, delay A seconds later, the relay pulls in, until the power is turned off P-31: After the power is turned on, the relay pulls in A seconds, turns off B seconds, and repeats indefinitely. P-32: There is a signal, start P-31 infinite loop; the signal disappears and the loop is terminated P-33: For a signal, start P-31 infinite loop; give another signal to terminate the loop P-34: After power-on, after delaying A seconds, the relay pulls in and stops after B seconds. P-35: signal, after A second delay, the relay pulls in and stops after B seconds. P-36: There is a signal, after more than A second, the relay pulls in, stops after B seconds, the signal disappears, and the timer clears and stops. P-37: There is a signal, the relay will stop automatically for A seconds, then stop for B seconds, and the signal will be invalid during A+B. P-38: After the signal exceeds A times, the relay will stop for B seconds.

Button Setting Description: Power display "--" indicates entering the standby state;

(On our panel: "Settings" is the first button ,"+" is the second button,“-”is the third button and "Start/Stop" is the last button .) Press the "Settings" for the first time (more than 1 second is required to prevent false triggering) Display: P -11: "+" "-" "Start/Stop" adjustment function mode Press “SETTINGS” for the second time. The display shows: A001: “+” “-” “ON/STOP” Adjust the first time A Press the "Settings" for the third time, the screen will display: B001: "+" "-" "Start/Stop" adjust the second time B Press "SETTING" for the fourth time, and display "---" to enter standby mode "Start/Stop" in standby mode as a start/stop signal for all functions

Decimal point time unit description:

X.XX decimal point in hundreds, timing range: 0.01 seconds ~ 9.99 seconds XX.X decimal place in ten, timing range: 0.1 seconds ~ 99.9 seconds XXX has no decimal point, timing range: 1 second ~ 999 seconds XXX. Decimal point is in one place, timing range: 1 minute to 999 minutes

Terminal:

1. DC+ : Input positive DC power supply (L: input AC power supply) 2. DC- : Input DC power negative (N: input AC power neutral) 3,.NO: Relay normally open interface, before the relay is vacant, after picking up, short circuit with COM. 4. COM: Relay public interface 5. NC: Relay normally closed interface, short circuit with COM before the relay is closed

Package Included:

1PCS * Digital DC 12V Home Automation Programmable Cycle Delay Timing Timer 30A Time Relay on off Switch Loop Module 0.01 sec - 999 min