3 Axis CNC MACH3 USB Motion Controller Card Board NVUM 200KHZ for Stepper servo Motor | Driver

Package include:

• 1 x 3 / 4 / 5 6 Axis 200KHzNVUM USB Mach3 Motion Control Card 

• 1 x USB Cable

• 1 x English Manual Will send by Email

NVUM Mach3 USB Motion Control Card

1. Performance parameter

1)  Support USB;

2)  12 ports photoelectric isolated input interface for ordinary digital data;

3)  10 ports photoelectric isolated output interface for ordinary digital data;

4)  1 port 0-10V spindle speed analog output interface(can change to PWM output);

5)  can support 3-6 axis stepper systems,200KHz pulse output for every axis;

6)  ARM motion control chip;

7)  Main device is 12V-32VDC power supply input,current should higher than 0.5A;

8)  Compatible with MPG input,support the digital display MPG from our company.

2.Product connection define and method

the connection of the controller includes power supply interface, USB connection interface, MPG interface, Stepper/Servo control output interface, spindle control output interface, Estop and limited switch and tool setting input interface and so on. Now we descript them in details as below.

3. Stepper motor control interface

As Figure 2-2 showed,No.1 terminal block is 6 axis stepper driver control output interface, from left to right, there are X,Y,Z,A,,B,C 6 axis output, it’s common anode,the cable connection for each axis is COM+/CP-/DIR-, COM is common+ ,CP is Pulse-, DIR is direction-.Connection showed as Figure 2-3.COM+ connect with the SP+ and DIR+.

4. Spindle control output

We define the interface from left are: GND1(Output GND),VSO(0-10V adjustable speed output),INDEX(spindle speed feedback input),OUT1(common output port 1),OUT2(common output port 2),.

Take Nowforeuer inverter as the example. Spindle control output and the inverter connection showed as Figure 2-4.If ACM and DCM are closed,only need to connect one port.

If need the Mach 3 to show the real in time spindle speed,just fix one hall device,every revolution send one pulse between INDEX and GND1,pulse voltage is 5V-10V.

Shipping

• Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately 

• We ship to worldwide 

• When you buy 1-2pcs we usually ship by Hongkong Air Post which will take round 10-15 business days. some areas may be later due to variation of postal service in different areas,if above 3pcs we can ship by DHL/UPS/EMS which need confirm by us

• All items will be shipped within 1-3 business days upon receipt of payment

Payment

• We accept payment,all must be confirmed(shipping and billing address must match and correct, ,and telephone number msut be offered for delivery)

• Payment must be made within 48hours of the auction end time

• Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.

Problem&Feedback

• Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it.

• We are a new member in ebay now,and need understand both of sides.

• Pls email us before you want to leave any negative feedback.

Refund

• When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos.

• Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost.

Contact us

• Welcome worldwide customer inquire and questions,we will try to do our best to feedback customer's email within 1-2 business days,if not pls check the mail box again

• Customer's satisfaction is very important to us.